Steel Anode Claws Chemical Composition Specification Working Range Element Min(%) Max.(%) C 0.08 0.15 Si 0.35 0.60 S 0.03 P 0.05 Mn 0.25 0.50 Cr 0.25 Ni 0.4 Mo 0.15 Cu 0.30 Carbon Equivalent Melt Range: 1494-1515℃ Electrolytic aluminum st...
echnical Requirements For Clad Steel-Alu Explosive Transition Joint
1.Each batch must have ultrasonic inspection certificate. 2.Sampling inspection finished products 2 ~ 3%, fusion surface not less than 98%. 3. The tensile strength of contact surface shall not be less than 120MPa. 4.The shear strength of con...
China aluminum anode component manufacturer
Anode component is an important part of electrolytic aluminum production process, which is welded by aluminum guide rod, explosive block and anode steel claw.In the electrolyzer, especially during the start-up, the anode components bear a l...
Some questions about electrolytic aluminum production
1. What is electrolytic aluminum smelting? Answer: electrolysis method for aluminum smelting is cryolite alumina melting salt electrolysis method. It takes cryolite as the solvent and alumina as the melting quality. Strong direct current flo...
Anode guide rod manufacturer
The anode guide rod is the aluminum product which is used in the anode guide rod of electrolytic cell after casting of aluminum liquid. It is a conductor used to connect anode bus and anode steel claw in aluminum electrolysis process. It pla...
