1 Introduction of Anode Rod (Stem)
The Anode Rod (Stem),is also be called Aluminum Stem Anode Rod,Aluminium Anode Rod (Stem),aluminium rod,etc,it is the conductor of the Anode carbon block. The structure is divided into three parts: the Anode Rod (Stem), the anode steel claws part and theElectrical Steel-Alu Transition Joints. It is an important loss component of the prebake electrolytic cell production. The Anode Rod (Stem) is made of first-grade aluminum and aluminum alloy. The length of the Anode Rod (Stem) is usually 2000~2200mm. The cross section is rectangular. The size depends on the current of the aluminum rod. The current density is 35~40A/ Cm2. Commonly used Anode Rod (Stem) have a rectangular or square cross-sectional area. The Anode Rod (Stem) is in contact with the horizontal large busbar and needs to be processed. It is required to be straight and smooth, and the surface has less oxide film to reduce the contact resistance.
Our company uses reasonable aluminum processing technology and processing equipment to process the specifications of Anode Rod (Stem) required for various capacity electrolytic cells. Anode Rod (Stem) processing specifications and geometric requirements, appearance requirements, surface finish in line with aluminum industry standards and design drawings, to avoid heat, reduce power consumption.
2.Specification of Anode Rod (Stem)
Name:Anode Rod (Stem)
Material:1050/1060/1070/4043/3003/5052/5083/6101/6060/6061/6063,etc
Surface Treatment:Sand Blasting,Polished or Customized.
Shape:Rectangular
Technique:Cold Drawn, horizontal or vertical direct chill cast [HDC OR VDC] from Aluminum or Aluminum alloy
Dimensions:Customized.
Hardness:99-202HB, 50-300HB
Al (Min):90-99.9%
Yield (≥ MPa):15
Temper:T3 - T8
Ultimate Strength (≥ MPa):33
Length:2000~2200mm
Standard: GB/T3191-2010 or Customized.
Surface:Mill Finish or Polished
Certification:ISO9001:2008
Packaging Details:Export Seaworthy packing standard
2.1 The specifications and allowable deviation of the Anode Rod (Stem) shall comply with the requirements of Table 1
Table 1 Unit：mm
2.2.Low-fold organization
Low-magnification organizations should meet the requirements of Table 2.
Table 2
3.The application of Anode Rod (Stem)
Aluminium stem anode rod is a main part in process of aluminum electrolysis. It Is the conductor of the carbon anode.
4,The packing of Anode Rod (Stem)
The Anode Rod (Stem) shall be bundle up by bunch,then,put on wooden pallet.
The Anode Rod (Stem),is also be called Aluminum Stem Anode Rod,Aluminium Anode Rod (Stem),aluminium rod,etc,it is the conductor of the Anode carbon block. The structure is divided into three parts: the Anode Rod (Stem), the anode steel claws part and theElectrical Steel-Alu Transition Joints. It is an important loss component of the prebake electrolytic cell production. The Anode Rod (Stem) is made of first-grade aluminum and aluminum alloy. The length of the Anode Rod (Stem) is usually 2000~2200mm. The cross section is rectangular. The size depends on the current of the aluminum rod. The current density is 35~40A/ Cm2. Commonly used Anode Rod (Stem) have a rectangular or square cross-sectional area. The Anode Rod (Stem) is in contact with the horizontal large busbar and needs to be processed. It is required to be straight and smooth, and the surface has less oxide film to reduce the contact resistance.
Our company uses reasonable aluminum processing technology and processing equipment to process the specifications of Anode Rod (Stem) required for various capacity electrolytic cells. Anode Rod (Stem) processing specifications and geometric requirements, appearance requirements, surface finish in line with aluminum industry standards and design drawings, to avoid heat, reduce power consumption.
2.Specification of Anode Rod (Stem)
Name:Anode Rod (Stem)
Material:1050/1060/1070/4043/3003/5052/5083/6101/6060/6061/6063,etc
Surface Treatment:Sand Blasting,Polished or Customized.
Shape:Rectangular
Technique:Cold Drawn, horizontal or vertical direct chill cast [HDC OR VDC] from Aluminum or Aluminum alloy
Dimensions:Customized.
Hardness:99-202HB, 50-300HB
Al (Min):90-99.9%
Yield (≥ MPa):15
Temper:T3 - T8
Ultimate Strength (≥ MPa):33
Length:2000~2200mm
Standard: GB/T3191-2010 or Customized.
Surface:Mill Finish or Polished
Certification:ISO9001:2008
Packaging Details:Export Seaworthy packing standard
2.1 The specifications and allowable deviation of the Anode Rod (Stem) shall comply with the requirements of Table 1
Table 1 Unit：mm
| Cross section Size |
Cross section Allowable deviation |
Length size |
Length Allowable deviation |
| 100*100 | ±3 | 1100∽1380 | 0∽+10 |
| 130*135 | ±3 | 2000∽2500 | 0∽+10 |
| Note: The dimensions not listed in the table can be negotiated with us | |||
2.2.Low-fold organization
Low-magnification organizations should meet the requirements of Table 2.
Table 2
| Defect name | Technical requirement |
| Crack, stomata | Not allowed to exist |
| Slag | No more than 1 point with an area greater than 1mm2 |
| No more than 5 points with an area less than 1mm2 |
3.The application of Anode Rod (Stem)
Aluminium stem anode rod is a main part in process of aluminum electrolysis. It Is the conductor of the carbon anode.
4,The packing of Anode Rod (Stem)
The Anode Rod (Stem) shall be bundle up by bunch,then,put on wooden pallet.
