
The arc furnace and intermediate frequency furnace are used to add rare earth to refine the steel to ensure the gas content in the molten steel and the conductivity and strength of the steel claw.The general production has parallel three claw, four claw, three - dimensional four claw, six claw, eight claw, double anode steel claw and other models. aluminum anode yoke is a consumable in the electrolytic aluminum production process, and its consumption and replacement frequency are generally based on the production limits of the electrolytic workshop.The movement of the anode assembly is performed only when the bus is lifted and the anode is replaced.
Generally, when the anode carbon block is consumed for 15-18 days, the bus bar shall be raised once and the anode assembly shall be adjusted once.However, the consumption of the anode carbon block is about 30 days, so it is necessary to replace the anode at this time. Each anode replacement is the consumption of the anode steel claw, and the replacement cycle of the aluminum anode yoke is 30 cycles, that is, 30 months, with an average of two and a half years.Sometimes need to see the specific consumption to determine, this Henan Chalco aluminum anode yoke.